This is a little embarrassing as I started this model years ago while the old SFA was still going, and I am hardly any further on now. However I hope this will spur me on to the finish line.
A brief reminder of what I am doing. This is a 1/20th scale model of the Lockheed Altair which I plan to finish in the scheme of the plane which Sir Charles Kingsford Smith flew; the "Lady Southern Cross". It is my own design and is for electric power with a Zombie controller.
This is the scheme and a pic of "Smithy" posing on the wing.
Lockheed Altair
Lockheed Altair
- Attachments
-
- vhusb40.jpg (90.24 KiB) Viewed 14680 times
-
- Altair 3-view2.jpg (112.64 KiB) Viewed 14680 times
Re: Lockheed Altair
Here are a few pics of the build. I posted all these previously so this is just a few as a reminder rather than a re-run.
- Attachments
-
- IMG_0068a.jpg (118.4 KiB) Viewed 14677 times
-
- IMG_0516a.jpg (102 KiB) Viewed 14677 times
-
- IMG_0701a.jpg (99.29 KiB) Viewed 14677 times
Re: Lockheed Altair
Some more.
- Attachments
-
- IMG_0707.JPG (241.09 KiB) Viewed 14677 times
-
- IMG_0711a.jpg (98.31 KiB) Viewed 14677 times
-
- IMG_0881a.jpg (111.11 KiB) Viewed 14677 times
Re: Lockheed Altair
The last pic I put on SFA was (I think) nearly eighteen months ago and not much has changed. The main progress has been that the Altair now has a canopy and two pilots. In another area I have gone backwards. A few weeks back I was at a point where I was ready for some flight trimming so I put the model in my van and headed out to my flying field. It was a pleasant evening, if a bit too breezy but i hoped the wind would die down as the sun went down. When I picked up the model. the tailplane now looked more like a propellor! In spite of pre shrinking and having been flat for months.
So no flight tests yet; instead tail end surgery. I cut out the tailplane and have rebuilt it with a carbon rod across the span and have given it a symmetrical section with balsa laminations top and bottom to hopefully stiffen it. I am not too bothered about the extra weight as I had to mount the Lipo battery at the CG to balance it so I can move that forwards a smidge if I need to.
So no flight tests yet; instead tail end surgery. I cut out the tailplane and have rebuilt it with a carbon rod across the span and have given it a symmetrical section with balsa laminations top and bottom to hopefully stiffen it. I am not too bothered about the extra weight as I had to mount the Lipo battery at the CG to balance it so I can move that forwards a smidge if I need to.
- Attachments
-
- IMG_1435.JPG (212.74 KiB) Viewed 14677 times
-
- IMG_1434a.jpg (143.8 KiB) Viewed 14677 times
Re: Lockheed Altair
Repairs.
- Attachments
-
- IMG_1438.JPG (254.24 KiB) Viewed 14677 times
-
- IMG_1436a.jpg (108.78 KiB) Viewed 14677 times
-
- IMG_1437.JPG (229.09 KiB) Viewed 14677 times
-
Pete Fardell
- Posts: 43
- Joined: Sun Sep 18, 2016 9:36 am
- Location: Hull UK
Re: Lockheed Altair
It's looking great, Tim!
(I like the pilots too- are they those vac-formed ones, or have you just got very good at carving?)
Pete
(I like the pilots too- are they those vac-formed ones, or have you just got very good at carving?)
Pete
Re: Lockheed Altair
Thanks Pete, they are Dave Banks pilots but with nothing left but the heads. You must be having a laugh if you think I carved them!
-
Site Admin (Dave)
- Site Admin
- Posts: 59
- Joined: Wed Jun 15, 2016 12:20 am
Re: Lockheed Altair
What a nice build Tim. Really clean. 
Re: Lockheed Altair
Really nice. I love the color scheme.
Mike
Mike
Re: Lockheed Altair
Nice work. This plane sure has some beautiful lines!